PDF Catalog

Hydrocyclones are facilities that are used for extra treatment of wastewater by filtration, for separating solids from liquids or for separating liquids of different density, the principle of separation is based on using centrifugal forces.

The hydrocyclone is used for dewatering of ground products and hydro classification of ore or coal. Light and fine fraction is exported up by water, but the heavier and coarser fraction is discharged below. Some types are used to enrich heavy suspensions or to clear sand from sludge. Apart from standard sand the hydrocyclone is able to extract new nomenclatures of materials suitable for making specialized plasters, etc. Hydrocyclone is the state of the arttechnology for the extraction of sand.

 

 

Scheme of the principle of operation of hydrocyclone

We offer to our customers the production of polyurethane hydrocyclones and polyurethane parts for cyclones with basic applications:

·        Mechanical cleaning of waste water from heavy rough impurities

·        Thickening coarse suspensions (sandy pulp)

·        For separation of a coarse particulate fraction in slurries

 

They are characterized by:

·        Excellent abrasion resistance

·        Excellent corrosion resistance

·        Excellent chemical resistance (acids, bases, oils)

·        High pressure resistance

·        Reliability

·        High performance

·        Low hydraulic resistance

Successful application in FGD plants (processing of gypsum and limestone suspensions).

 

 

 

Name	Hydrocyclone ø 45	Hydrocyclone ø 100	Hydrocyclone ø 250
catalogue #	ХЦ45-100.00.00	04- 00199	04-00 198
Material	polyurethane	polyurethane	polyurethane
hardness	87 Shore A	87 Shore A	87 Shore A
Diameter (mm)	ø 45	ø 100	ø 250
Production capacity (m³/ hr)	2 ÷ 7	10 ÷ 20	50 ÷ 100
Nominal separation (microns)	6 ÷ 10	15 ÷ 30	50 ÷ 90
Input (mm)	ø 30	ø 37	ø 90
Upper nozzle (mm)	ø 33	ø 34	ø 60, ø 80, ø 100
Lower nozzle (mm)	ø 2, ø 12, ø 14	ø 45	ø 25, ø 30, ø 40, ø 60
Length (mm)	345	956	1565
Weight (kg)	3,5	19	83